Wednesday, October 23, 2013

 D link 2730u Adsl wireless modem + router configuration setup guide.




DLink 2730u PPPoE Settings

  • Open Internet Explorer.
  • Go to Router menu by typing the url http://192.168.1.1 
  • Enter Username admin & Password = admin

  • Click On Advanced Setup
    • Click on Add.

  • Enter VPI & VCI values as provided by your internet service provider (ISP).
  • For Bsnl: VPI = 0, VCI = 35,    For MTNLVPI = 0, VCI = 32
  • For Airtel: VPI = 1, VCI = 32,  For  VSNLVPI = 0, VCI = 33
  • Leave the other settings as default and save the settings.

  • Now Click On WAN Service and Setup the WAN (Wide Area Network)
  •  Click Add button.

  • Click Next button.

  • Select PPP over Ethernet (PPPoE) and Click Next.

  • Enter PPP Username & PPP Password provided by your ISP
  • Enter PPPoE Service Name anything as you wish.
  • Authentication Method = AUTO
  • Enable the Firewall option.
  • Leave the other Settings as default and Click Next.

  • Click Next.

  • Tick the Select DNS Server Interface from available WAN interfaces & Click Next.

  • Now Click Apply/Save Button.

  • That's it Now You have successfully created the WAN ( Wide Area Network)

D-Link 2730u Modem + Router Wireless (Wifi) Configuration

  • Now Open the Wireless Settings.
    • Tick Enable Wireless
    • Select Your Country.
  • Leave the other settings as default & Click Apply/Save button.

  • Now open Security.
    • Enable WPS = Disabled.
    • Select SSID = Dlink
    • Network Authentication = WPA-Personal & Auto
    • WPA/WAPI PassPhrase = Any Password.
    • WPA Group Rekey Interface = 0
    • WPA/WAPI Encryption = TKIP + AES
  • Apply & Save the settings.

Set  (TCP/IPv4) - Settings

  • Go to Control panel and open Network and Sharing Center

  • Click on Change adapter settings.

  • Right Click on  Local Area Connection (Lan)
  • Open Properties.

  • Select Internet Protocol Version 4(TCP/IPv4)
  • Open Properties.

  • Select Use the following IP address:
  • Enter IP address = 192.168.1.55
  • Subnet mask = 255.255.255.0
  • Default gateway = 192.168.1.1
  • preferred DNS server = 192.168.1.1
  • press Ok and save settings.
That's it you have successfully configured your internet connecting using the dlink 2730u Router. If you have any doubts please ask in comments.


{ 1 comments... read them below or add one }

Pageviews

Followers

Powered by Blogger.

- Copyright © 2013 Selva Sharing -Selvasharing- Powered by Blogger - Designed by @ Access -