Showing posts with label Networking. Show all posts
Specifications for CAT5, CAT6 and CAT6e Cables
Category 5, 5e, 6, and 6e are progressively enhanced specifications for the Ethernet over twisted-pair cables. These networking cables contain several pairs of wires twisted together in order to reduce signal interference. Ethernet cables typically use an 8P8C (eight positions, eight contacts) modular connector and a common wiring schematic referenced by the Telecommunications Industry Association.


Category 5
- Category 5 transmits at 100MHz frequencies, providing a rated line speed of up to 100Mbit/s and a max cable segment length of 100 meters. Most Category 5 cables, designed for early networks, only used two twisted pairs. Older Category 5 cables continue to make up the bulk of the world’s network infrastructure.
Category 5e
- An improved specification to Category 5 was later introduced. By reducing noise and signal interference, Category 5e was capable of increasing rated transfer speeds to 350 Mbit/s over 100 meters. The new standard also required all cables to include four twisted pairs (all eight contacts). An optimized encoding scheme allows up to 50-meter lengths of Category 5e cable to perform at, or near, Gigabit Ethernet (1000BASE-T) speeds.
Category 6
- The mainstream adoption of Gigabit Ethernet (1000BASE-T) required new industry-standard cables capable of transmitting at a higher frequency of 250 MHz. Category 6 cable uses thicker-gauge wire, increased shielding, and more pair twists per inch to reduce signal noise and interference. The tighter specifications guarantee that 100-meter runs of Category 6 are capable of 1000 Mbit/s transfer speeds. 10-Gigabit Ethernet speeds are achievable when reducing cable lengths to less than 50 meters.
Category 6e
- Category 6 Enhanced (6e) is an augmented specification designed to double transmission frequency to 500 MHz. By wrapping Category 6e in grounded foil shielding, full 10-Gigabit Ethernet speeds can be reached without sacrificing the max cable length of 100 meters.
Ethernet Cable Wiring Specification
- All Ethernet cables use either the T568A or T568B wiring standard. Mixing multiple cables is permitted, but using a different wiring standard on each end of a single cable will result in an Ethernet crossover cable.T568A
Pin 1 – White/Green – Pair 3, tip
Pin 2 – Green– Pair 3, ring
Pin 3 – White/Orange – Pair 2, tip
Pin 4 – Blue – Pair 1, ring
Pin 5 – White/Blue – Pair 1, tip
Pin 6 – Orange – Pair 2, ring
Pin 7 – White/Brown – Pair 4, tip
Pin 8 – Brown – Pair 4, ringT568B
Pin 1 – White/Orange – Pair 2, tip
Pin 2 – Orange – Pair 2, ring
Pin 3 – White/Green – Pair 3, tip
Pin 4 – Blue – Pair 1, ring
Pin 5 – White/Blue – Pair 1, tip
Pin 6 – Green – Pair 3, ring
Pin 7 – White/Brown – Pair 4, tip
Pin 8 – Brown – Pair 4, ring
Chassis
Chassis
Alternatively referred to as the computer case and
sometimes referred to as the system unit or base unit,
the chassis is the housing that helps protect and organize all
the components that make up your computer. In the picture to the right, is an
empty computer chassis.
Why do we need a computer case?
Most people overlook the computer case as just a box, but it
does provide the below important features.
·
Structure - The case is what holds everything
together in a compact and organized fashion.
·
Protection - Without the case, each of the
sensitive components within the computer would be vulnerable to dirt, foreign
objects, kids, animals, as well as electrical interference.
·
Cooling - The case helps keep the air properly
flowing over all components, which keeps everything cool and running properly.
·
Noise - Many computers and components have
fans that generate noise. Having those components within a confined case
reduces the overall noise.
·
Aesthetics - Although some may disagree, most
people would rather look at the case instead of all the circuit boards, wires,
and all the components of a computer.
1U
- 7U
The
1U, 2U, 3U, 4U, 5U, 6U and 7U are all different sized rackmount servers; the U following
the number is short for unit. The number indicates the size of the rackmount,
1U being the smallest rackmount and 7U being the biggest rackmount. Below is a
listing of each of the different units and their dimensions, although theWidth and Height of a rackmount
may be standard, the depth of a rackmount may
change, as can be seen below. If your rackmount server is going to be placed in
a constrained area, it's best to verify with the manufacturer of the rackmount
what the exact dimensions are. In the picture to the right, is a picture
Courtesy of Dell Inc. of some of the DellPowerEdge servers and
examples of different rackmount units.
|
Unit
|
Dimension (W x H x D)
|
|
1U
|
19" x
1.75" x 17.7"
19" x 1.75" x 19.7" 19" x 1.75" x 21.5" |
|
2U
|
19" x 3.5"
x 17.7"
19" x 3.5" x 20.9" 19" x 3.5" x 24" |
|
3U
|
17.1" x
5.1" x 25.5"
|
|
4U
|
19" x 7" x
17.8"
19" x 7" x 26.4" |
|
5U
|
19" x
8.34" x 19.67"
19.1" x 8.75" x 26.4" |
|
6U
|
19" x
10.5" x 19.5"
|
|
7U
|
17" x
12.2" x 19.8"
|
Most
collocations and ISPs
accept 1U, 2U or 5U chassis; however,
it is still a good idea to check with whomever is planning to host your server to verify what
they support and at what cost.
Tag :
Networking