Selva Sharing

• Click On Advanced Setup
• Click on Add.

• Enter VPI & VCI values as provided by your internet service provider (ISP).
• For Bsnl: VPI = 0, VCI = 35,    For MTNL: VPI = 0, VCI = 32
• For Airtel: VPI = 1, VCI = 32,  For  VSNL: VPI = 0, VCI = 33
• Leave the other settings as default and save the settings.

• Now Click On WAN Service and Setup the WAN (Wide Area Network)
•  Click Add button.

• Click Next button.

• Select PPP over Ethernet (PPPoE) and Click Next.

• Enter PPP Username & PPP Password provided by your ISP
• Enter PPPoE Service Name anything as you wish.
• Authentication Method = AUTO
• Enable the Firewall option.
• Leave the other Settings as default and Click Next.

• Click Next.

• Tick the Select DNS Server Interface from available WAN interfaces & Click Next.

• Now Click Apply/Save Button.

• That's it Now You have successfully created the WAN ( Wide Area Network)

D-Link 2730u Modem + Router Wireless (Wifi) Configuration

• Now Open the Wireless Settings.
• Tick Enable Wireless
• Select Your Country.
• Leave the other settings as default & Click Apply/Save button.

• Now open Security.
• Enable WPS = Disabled.
• Select SSID = Dlink
• Network Authentication = WPA-Personal & Auto
• WPA/WAPI PassPhrase = Any Password.
• WPA Group Rekey Interface = 0
• WPA/WAPI Encryption = TKIP + AES
• Apply & Save the settings.

Set  (TCP/IPv4) - Settings

• Go to Control panel and open Network and Sharing Center

• Click on Change adapter settings.

• Right Click on  Local Area Connection (Lan)
• Open Properties.

• Select Internet Protocol Version 4(TCP/IPv4)
• Open Properties.

• Select Use the following IP address:
• Enter IP address = 192.168.1.55
• Subnet mask = 255.255.255.0
• Default gateway = 192.168.1.1
• preferred DNS server = 192.168.1.1
• press Ok and save settings.